PDA

View Full Version : rearend width question



4bangerhotrod
11-30-2011, 09:50 PM
on a ford 9in, i know most people are running 58in or 60in rearend widths on metric cars when taking that measurement where is this measured from is it from the flanges on the housing it's self or is it measured on the face of the axle across to the other axle face

dirt daddy
12-01-2011, 01:13 AM
Yes the axle flang where ur studs go thur

4bangerhotrod
12-03-2011, 07:59 PM
i have a housing that measures 56 1/2in without axles, would that be a 60in rearend

dirt daddy
12-04-2011, 12:50 AM
Im not real sure buddy i would say it is but realy iv never missed with a stock axle ford wev always bn allowed 2 run the floaters

dirty white boy
12-11-2011, 12:03 AM
thay had at lest 2 defernt back spaced backin plates so you need axles to get exact in width

lil73c
12-11-2011, 10:06 AM
I meassured an old disc brake lincoln rearend out back and the flanges were about an inch and a half from the tube!! if its close to yours then its about 60inch