604 crate fresh sale or trade

[carterracing28]

604 was run at lanier speedway in a truck with a 6300 chip!! motor was checked and is like new fresh with gm bearings gm rings and gm performance gasket kit!! heads fresh ready to run u can take it as it is or i can seal it with fasttrack seals your choice will trade for a GOOD hobby motor!! 423 618 5382 thanks can text NO JUNK

[dirtnut10m]

what are your hobby motor rules may have a motor that fits thanks

[carterracing28]

what are your hobby motor rules may have a motor that fits thanks

text me what the info on your motor is please thanks

[dirtnut10m]

355 ci with 010 4 bolt main bored ,30 over line bored decked steel crank , h-beam rods , forged flat top pistons double hump chevrolet heads worked .600 lift springs stainless valves roller rockers .585 solid lift cam , hurricane aluminum high rise intake msd 8365 billet dist 10mm wires brand new high torque starter holley 4412 carb with adapter plate

[carterracing28]

where ya located

[link bar]

interested in a 2010 rayburn with 6 races on the chassis, uppers, lowers, spindles, motor plate, fuel cell, brake lines, complete body... from chatsworth ga.
about a 6000 if bought new
859-200-1522

[carterracing28]

yes sir 423 618 5382

[digit15]

i got a nice 355 scat crank, je pistons , vortec heads cut to the minimum w/ hollow core ferra valves ,1.5 rockers ,w/ 604 hp intake,nice kick out oil pan ,also have Willies carb that goes ,this is not junk , txt if interested in trading 276-620 3194

[dynoman14]

Mr.Carter
Your original post stated Hastings rings (not Fastrak legal) your updated post says GM rings. It is real easy to tell the difference in tech.

Which ones are they?

I am interested either way.

Thanks

[carterracing28]

it has the CORRECT Moly top, cast second, rings my boss is a certified fasttrack builder. trade pending. THANKS