go2fast
12-04-2011, 12:52 PM
Have a rodeck block with 400 main 4.135 bore new hone job 1500.00
Have a crower crank 3.375 with 400 main and 2.100 rod pin 500.00
Have a set of carrillo rods 6.000 lg .927 pin carr 7/16 bolts 600.00
have 1 dry sump (pro) oil pan alum 150.00
Have 1 shaver-wesmar gear drive and timing cover 200.00
Have 1 set of GM 18 deg heads with tita valves new valve job with jesel rocker 1.6 ex 1.7 in and stands 107 with valley tray 2,700.00
This was the short block made about 720 hp
call 816 806 6721
Have a crower crank 3.375 with 400 main and 2.100 rod pin 500.00
Have a set of carrillo rods 6.000 lg .927 pin carr 7/16 bolts 600.00
have 1 dry sump (pro) oil pan alum 150.00
Have 1 shaver-wesmar gear drive and timing cover 200.00
Have 1 set of GM 18 deg heads with tita valves new valve job with jesel rocker 1.6 ex 1.7 in and stands 107 with valley tray 2,700.00
This was the short block made about 720 hp
call 816 806 6721