WTB SBC Aluminum Heads

[dirtrace09]

Looking for a set of 23 degree sbc aluminum heads setup for a roller cam. If you have any that you are looking to sell, please let me know.

[bignip1]

I have a set of 10x brodix cell 478 338 2341

[dynoman14]

09,
I sell new sets of "PRO" 23* Aluminum heads for $999 set with 202-160 valves mild .600" roller springs, steel retainers. Upgrades are available to PSI springs, ti retainers $1250, titanium valves +$500. We can stick big valves in them if you want as none of them are built in advance. They are built to what you want and what you run at your track.

They are capable of making 500hp on a decent 358 right out of the box. With Stage1 porting they will go 550hp ( +$500 ). Stage2 porting & 2.05 intakes = 600hp (+$1000 ).

If you want, I have a 5 race old engine with the same heads on it with bowl blend and mild port. 391" SBC made 621hp and 576TQ 7500RPM engine. Pro-Shaft rockers, 4340 crank and rods, Probe pistons, 4-Bolt mains Premium fasteners thru-out.
Built as an economy limited engine but was run in some SUPR races by Bobby Dauderman. $9,500. It is back for Dyno testing for carburetor & header development, if it doesn't sell over the winter it will go back in his car for next year.