jimbbski
12-15-2011, 08:40 PM
What is the stock CC volume of a Ford 2.3L head? I have a late 80's early 90's D-port head off a Non-turbo engine. I have measured about 62 CC on a stock chamber and now get 65-66 CC after a port-N-polish of the chamber. I have also ported the head.
Also does anyone know how much CC you lose for each 0.010 inch you mill off of the head. I am looking to get at least 10:1 but no more then 10.5:1 compression ratio. The bore & stroke is stock 2.3L.
Also does anyone know how much CC you lose for each 0.010 inch you mill off of the head. I am looking to get at least 10:1 but no more then 10.5:1 compression ratio. The bore & stroke is stock 2.3L.