View Full Version : can i ream my spindles
rathole7
12-22-2011, 05:33 PM
im installing different lower arms on my grt and the screw in ball joints only come in the larger size can i use the reamer i have (left over from my street stock days) to enlarge the hole or should i buy new spindles?
MasterSbilt_Racer
12-22-2011, 05:51 PM
If you have the proper tapered reamer, go for it. I have done it many times.
fox1162002
12-22-2011, 10:13 PM
Done it for years also on several cars. Just watch the depth and don't go to far.
GRT85c
12-23-2011, 09:24 AM
The other option is to get some rebuildable balljoints (i.e. Howe). That way you can just get the correct stud for your application.
Hope this helps!
Tim
mqdirtracer57
12-23-2011, 12:35 PM
QA1 makes a screw in ball joint with the correct pin for a GRT...part # is 1210-102
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.