PDA

View Full Version : metric car setup



psycho racer
01-14-2012, 06:39 PM
the rules just came out and they are allowing us to now run racing springs and adjustable cups.what springs should i run and is there anything i can do with my rear trailing arms. should i take off my sway bar or not.car weights 3400lbs got to run street tire i run 245/60 and 255/60 bfgs.any help would be appr.

dirt daddy
01-14-2012, 11:34 PM
Rf 900 lf 1000 rr 200 lr 250 take sway bar off redrill ur top arms for pinion angle 6-8 put ur lowers as close up to the rearend housing as u can

psycho racer
01-15-2012, 09:05 AM
well i was goin to buy a set of the adjustable trailing arms for the top and how can i move the bottoms up do i need another bracket or can i re drill. thanks for the help

dirt daddy
01-15-2012, 12:47 PM
Yes u can jus redill

psycho racer
01-15-2012, 07:13 PM
thanks for the help and i mis read the rules its 3200 does that change anything

dirt daddy
01-15-2012, 11:55 PM
No u can go softer on both front springs iv went down as low as 750 on the rf at 3400 jus dont let people tell u it wont work it works great

psycho racer
01-16-2012, 12:06 AM
do i need to keep the 100 pound split