wildmanracer3
01-15-2012, 08:22 AM
This is a new never and never used HVC ignition box. I opened the package and then sold my car and dont need this box. These are the specs from the MSD website. This is the black MSD box.
The MSD 6 HVC is designed for professional racing applications that demand high rpm for long periods of time. The box comes ready to race in NASCAR competition. We strongly recommend that you use the HVC coil that is matched to this box, to utilize all the power it provides.
•Multiple spark, capacitive discharge ignition control
•Clear epoxy potting compound for vibration protection
•Clear base plate for easy tech inspection
•6-pin Weathertight connector, mandatory for NASCAR use
•Special 4-pin connector to plug directly into the MSD Soft Touch Rev Control 8738 or Soft Touch Engine Control 8968
•Multiple sparks for 20 degrees of crankshaft rotation
•Accepts breaker points, amplifier and magnetic pickup trigger inputs
•550 primary voltage output to coil
•150 millijoules per spark up to 15,000 RPM
•Works on 12 - 18 volt electrical system
•Built-in reverse polarity protection circuit
•Must be used with HVC Coil PN 8250
•No programming loops
This cost $530 new at Speedway Motors.
http://www.speedwaymotors.com/MSD-6-HVC-Ignition-Box-with-Soft-Touch,32660.html
I will take $425 shipped to your door. Paypal accepted. Pictures available. Email me at chrisshealy3@yahoo.com
The MSD 6 HVC is designed for professional racing applications that demand high rpm for long periods of time. The box comes ready to race in NASCAR competition. We strongly recommend that you use the HVC coil that is matched to this box, to utilize all the power it provides.
•Multiple spark, capacitive discharge ignition control
•Clear epoxy potting compound for vibration protection
•Clear base plate for easy tech inspection
•6-pin Weathertight connector, mandatory for NASCAR use
•Special 4-pin connector to plug directly into the MSD Soft Touch Rev Control 8738 or Soft Touch Engine Control 8968
•Multiple sparks for 20 degrees of crankshaft rotation
•Accepts breaker points, amplifier and magnetic pickup trigger inputs
•550 primary voltage output to coil
•150 millijoules per spark up to 15,000 RPM
•Works on 12 - 18 volt electrical system
•Built-in reverse polarity protection circuit
•Must be used with HVC Coil PN 8250
•No programming loops
This cost $530 new at Speedway Motors.
http://www.speedwaymotors.com/MSD-6-HVC-Ignition-Box-with-Soft-Touch,32660.html
I will take $425 shipped to your door. Paypal accepted. Pictures available. Email me at chrisshealy3@yahoo.com