PDA

View Full Version : Rocket Birdcage Location



DK1
01-16-2012, 05:02 PM
I just bought a brand new set of TWM birdcages for my Black front end Rocket. I previously had the liner style. I also had new tubes installed on my QC.

I'm looking for the measurement of the birdcage location on each side?

tw50
01-17-2012, 05:18 PM
outside of rotor to shock mount 8 3\4 on left 8 1\4 on right

DK1
01-17-2012, 06:46 PM
Where do I measure to on the birdcages?

AmickRacing
01-17-2012, 09:57 PM
I'm 99% sure you measure to the center of the shock mount

bsm126
02-10-2012, 08:46 AM
Is there a measurement for the right side birdcage?

DK1
02-10-2012, 04:42 PM
I called Rocket and this what I was told:

Left side should be 8 7/8
Right side should be 8 1/8

Measuring from OUTSIDE of rotor to the center of the shock mount. Shock mount should be on the outside of the mount closest to the wheel. All the bars should mount on the inside of the mounts.

ABAtester
02-19-2012, 04:39 PM
Are those measurements based on the 62.5" wide rear end with right side 3.5" longer than the left?