stunner
03-11-2012, 03:48 PM
Guys heres the deal. After selling on this forum and several others for the last 8-9 years I am getting out of the parts business. I am doing this as I have taken on weekly promotion of a local racetrack. I want all the parts left in my shop gone by April 1st barring my personal items. I am going to do this by selling on this forum and others as well as absolute auctions on Ebay with starting bids of $0.99 and no reserves. The stuff is going to sell!! If your interested and serious please call,text or pm. Please refrain from requesting pics of every little item. I DO NOT SELL JUNK!!
I have a 1995 White/GMC VOLVO Semi toter I got when I bought out a race team this past spring. I never used it as I basically never ran this season do to my businesses being busy. I did just have a new starter installed as well as the brake foot valve ($1190). Has the Cat engine with 600,000 miles. Also has the Super 10 trans and it does have the Jake brake. Truck is good running and driving truck. Has a crack in windshield and a couple other little flaws but nothing major. It has had a shower installed and water lines ran to it as well as water heater installed. The drainage tanks are in the truck and ready for installation. Has a table that folds into a bed and a bunk above it. Has cabinets with a sink as well. Rear has a huge storage area that was used for parts but could be converted to a bedroom or whatever buyer decides. Man cab is large and has a couch behind the 2 captain chairs and an overhead bunk as well. I drove this truck home and it has basically sat since. Rear tires are in excellent condition with less than 400 miles and fronts are decent. Truck needs some time and a little money put in it to be a $25,000-35000 hauler. I dont have the time, desire, or need to do so. Asking $6,500 obo or $5500 minus the box! I will send pics of the unit at your request. SOLD PENDING FINAL PAYMENT
NEW Sweet collapsable steering column. Never ran and brand new with the steering coupler. Lists for $275+. I will take $235
NEW Fluidyne deck mount oil cooler. It has been bolted up to the car but never had any liquids in it or even had a line attached as I switched set-ups before running. Its in the original box. It was $289 new plus tax and shipping. I will take $200 shipped
Barnes 4 stage drysump oil pimp. Its fresh. It had been blown up and had the gears replaced and/or polished. Its 100% good to go. Has rock chips in outer body(standard for dirt car). Its an older pump but works great. $325
2 New Willwood straight vien 1.25" rotors. Never bolted up. Asking $45 for pair
Used 34.5" aluminum Fastshaft driveshaft. Has about a dime size dent. Very useable or excellent spare. $85
Stealth 750 with 850 baseplate ultralite composite carb. Its a gas carb. Its also just been gone threw and has no laps on it. Asking $825
Jim Evans racing 4412 2 barrel carb. This carb has 4 nites on it since it was freshened. It makes excellent smooth power. Has billet metering blocks. Asking $375
GM Bowtie block. Needs to go to 4.165 bore. Has 350 mains. No sleeves. Its a former Arca block and will need remote filter mount but is setup for wet sump oiling. $850 This is a consignment
Crower 3.875 stroke 400 main small journal (2.00) rod pin 48 pound crank. This is a genuine billet crower crank and has a fresh polish. Asking $375 This is a consignment
32 gallon ATL fuel cell. Its in nice used shape and has a used frame on it from a GRT latemodel. $275
32 Gallon jaz fuel cell. Its in decent used shape. $75
1 Engine shipping pod. This is basically new. I bought a new Mullins engine last year and they shipped it to me in this pod so its been used once. Its complete with engine mounts. They sell for $325 new. Will take $225
2 complete Quarter Master ULGC reverse mount starter GM triple disc clutch setups. These are complete setups and include the bellhousings, starters, clutches, and throwout bearrings. Niether has been used for 2 years as the owner went to IMCA steel bellhousing setups. No cracks in the bells and disc are good starters have been bench tested. These are $1500+ new. Asking $550 for each setup
Quarter Master 153 tooth GM 2 disc clutch setup. Comes with clutch flywheel starter and magnesium bellhousing. No throwout bearring! Everything is in nice shape. Asking $425
Tilton GM 153 tooth Magnesium bellhousing. Its just the bell. $175
Tilton Ford magnesium bellhousing for OEM flexplate with throwout bearring. Asking $225
Tilton Ford Magnesium bellhousing for oem flexplate. Just the bell. $150
GM cast bellhousing. It has cracked and been repaired at one time and ran with no further issue since. It is IMCA legal as it is a steel bell. $75
3 GM aluminum bellhousings. All good shape with no cracks or welds. $50 ea
1-14" Real aluminum beadlock wheel. Outer engine is bent in slightly but very useable as is and would make an excellent spare. 5" offset. Asking $95
1-12" Weld aluminum beadlock wheel. Its in good used shape. 3" offset. Asking $85
Pair of Birky aluminum birdcages. They need alittle repair. Nothing to major. Asking $175
Many NEW and used misc aluminum birdcage parts and pieces. Tons of stuff!!!!
used black fiberglass roof. Its in excellent shape. Asking $85
Wilwood cailper set. 5.25" bolt pattern. matched set of 4. Asking $175
Many misc New and used Wilwood calipers $20-90
9 Real and Weld outer beadlock rings. These are either new or in excellent used shape. $85 a piece new. Asking $25ea or $175 for all 9
Afco 7" double ajustable shock. Complete with coilover kit. $125
35 misc coilover springs. $15ea
Wilwood dual pedal reverse mount assembly with masters and brake adjuster. Asking $175
Older Sweet rack with in shaft servo. its a 18.25" rack and a 3.4 ratio. Asking $250 for rack and servo
Used Styles Tri-Y LS header for Mastersbilt, GRT, etc. Only have LS. Fits 13,15,16, 18* heads or any other with the straight pattern. Will not fit 23* $125
2 used Masterbilt liftarms. $40 ea
1 new GRT short liftarm. Never used or even painted. $40
2 used Bowtie GM cast iron "marine" high rise intakes. Asking $175 for the one and $125 for other.
Power Plus Hurricane Intake (Edelbrock Super Victor 2925 copy) Its used but no damage. Asking $110
Edelbrock Torker intake $75
used stagger gauge $20
2 used sets of black simpson seat belts. $20ea
set of used black simpson belt pads $10
7 used Moroso foam prefilters for air cleaner $5 ea
4 used qc gear boxes. Asking $10 for all 4
1 qc gear storage container. It holds 8 sets of gears. Asking $20
used GM system 1 cleanable oil filter. Asking $35
used KSE mount. This is the bolt on mount that mounts the KSE pump to a Bert bellhousing. $20
New blue neck collar. Its the foam style with blue cover. Never out of plastic $20
New bead breaker. $20
Carb hats 1-cv, 1-willys, . Asking $5ea
2 jaz overflow tanks. Asking $10ea
gilmer water pump/crank pulley set-up. Its complete with the mandrel. $65
1 PPM double ajustable jbar. $35
6 NEW Napa gold 14x4" air filters. Its a sealed case. I switched to the r2c this year. $50 for the case
New sweet splined steering coupler in package $40
Hex steering wheel couplers. Asking $10ea
2 6 Blade fans. Asking $10ea
3 used throttle pedals. $10ea
used fuel cell cap. large d-ring style $10
2 used 1/2" sure seal for air cleaner bases. $5 ea
Lead that has been formed into ballast for racing purposes. Only have about 1100 lbs left as its been selling fast. Will sell for $1 per pound and ship up to 68 lbs at a time threw the USPS for $12.95 in shipping. Or will sell it in large lots for less.
Many misc items like new in box MSD stuff, new boxes of rivits, new fuel pumps, fan and carb spacers, TONS of aeroquip lines and fittings, misc rocker arms, axles, axle tubes, fiberglass roofs, and just lots more misc items i've aquired in my years of parts sales (there $1000's in just misc little stuff).
Like said above everything is going down the road asap. Call text or pm for more info. 815-990-8865
I have a 1995 White/GMC VOLVO Semi toter I got when I bought out a race team this past spring. I never used it as I basically never ran this season do to my businesses being busy. I did just have a new starter installed as well as the brake foot valve ($1190). Has the Cat engine with 600,000 miles. Also has the Super 10 trans and it does have the Jake brake. Truck is good running and driving truck. Has a crack in windshield and a couple other little flaws but nothing major. It has had a shower installed and water lines ran to it as well as water heater installed. The drainage tanks are in the truck and ready for installation. Has a table that folds into a bed and a bunk above it. Has cabinets with a sink as well. Rear has a huge storage area that was used for parts but could be converted to a bedroom or whatever buyer decides. Man cab is large and has a couch behind the 2 captain chairs and an overhead bunk as well. I drove this truck home and it has basically sat since. Rear tires are in excellent condition with less than 400 miles and fronts are decent. Truck needs some time and a little money put in it to be a $25,000-35000 hauler. I dont have the time, desire, or need to do so. Asking $6,500 obo or $5500 minus the box! I will send pics of the unit at your request. SOLD PENDING FINAL PAYMENT
NEW Sweet collapsable steering column. Never ran and brand new with the steering coupler. Lists for $275+. I will take $235
NEW Fluidyne deck mount oil cooler. It has been bolted up to the car but never had any liquids in it or even had a line attached as I switched set-ups before running. Its in the original box. It was $289 new plus tax and shipping. I will take $200 shipped
Barnes 4 stage drysump oil pimp. Its fresh. It had been blown up and had the gears replaced and/or polished. Its 100% good to go. Has rock chips in outer body(standard for dirt car). Its an older pump but works great. $325
2 New Willwood straight vien 1.25" rotors. Never bolted up. Asking $45 for pair
Used 34.5" aluminum Fastshaft driveshaft. Has about a dime size dent. Very useable or excellent spare. $85
Stealth 750 with 850 baseplate ultralite composite carb. Its a gas carb. Its also just been gone threw and has no laps on it. Asking $825
Jim Evans racing 4412 2 barrel carb. This carb has 4 nites on it since it was freshened. It makes excellent smooth power. Has billet metering blocks. Asking $375
GM Bowtie block. Needs to go to 4.165 bore. Has 350 mains. No sleeves. Its a former Arca block and will need remote filter mount but is setup for wet sump oiling. $850 This is a consignment
Crower 3.875 stroke 400 main small journal (2.00) rod pin 48 pound crank. This is a genuine billet crower crank and has a fresh polish. Asking $375 This is a consignment
32 gallon ATL fuel cell. Its in nice used shape and has a used frame on it from a GRT latemodel. $275
32 Gallon jaz fuel cell. Its in decent used shape. $75
1 Engine shipping pod. This is basically new. I bought a new Mullins engine last year and they shipped it to me in this pod so its been used once. Its complete with engine mounts. They sell for $325 new. Will take $225
2 complete Quarter Master ULGC reverse mount starter GM triple disc clutch setups. These are complete setups and include the bellhousings, starters, clutches, and throwout bearrings. Niether has been used for 2 years as the owner went to IMCA steel bellhousing setups. No cracks in the bells and disc are good starters have been bench tested. These are $1500+ new. Asking $550 for each setup
Quarter Master 153 tooth GM 2 disc clutch setup. Comes with clutch flywheel starter and magnesium bellhousing. No throwout bearring! Everything is in nice shape. Asking $425
Tilton GM 153 tooth Magnesium bellhousing. Its just the bell. $175
Tilton Ford magnesium bellhousing for OEM flexplate with throwout bearring. Asking $225
Tilton Ford Magnesium bellhousing for oem flexplate. Just the bell. $150
GM cast bellhousing. It has cracked and been repaired at one time and ran with no further issue since. It is IMCA legal as it is a steel bell. $75
3 GM aluminum bellhousings. All good shape with no cracks or welds. $50 ea
1-14" Real aluminum beadlock wheel. Outer engine is bent in slightly but very useable as is and would make an excellent spare. 5" offset. Asking $95
1-12" Weld aluminum beadlock wheel. Its in good used shape. 3" offset. Asking $85
Pair of Birky aluminum birdcages. They need alittle repair. Nothing to major. Asking $175
Many NEW and used misc aluminum birdcage parts and pieces. Tons of stuff!!!!
used black fiberglass roof. Its in excellent shape. Asking $85
Wilwood cailper set. 5.25" bolt pattern. matched set of 4. Asking $175
Many misc New and used Wilwood calipers $20-90
9 Real and Weld outer beadlock rings. These are either new or in excellent used shape. $85 a piece new. Asking $25ea or $175 for all 9
Afco 7" double ajustable shock. Complete with coilover kit. $125
35 misc coilover springs. $15ea
Wilwood dual pedal reverse mount assembly with masters and brake adjuster. Asking $175
Older Sweet rack with in shaft servo. its a 18.25" rack and a 3.4 ratio. Asking $250 for rack and servo
Used Styles Tri-Y LS header for Mastersbilt, GRT, etc. Only have LS. Fits 13,15,16, 18* heads or any other with the straight pattern. Will not fit 23* $125
2 used Masterbilt liftarms. $40 ea
1 new GRT short liftarm. Never used or even painted. $40
2 used Bowtie GM cast iron "marine" high rise intakes. Asking $175 for the one and $125 for other.
Power Plus Hurricane Intake (Edelbrock Super Victor 2925 copy) Its used but no damage. Asking $110
Edelbrock Torker intake $75
used stagger gauge $20
2 used sets of black simpson seat belts. $20ea
set of used black simpson belt pads $10
7 used Moroso foam prefilters for air cleaner $5 ea
4 used qc gear boxes. Asking $10 for all 4
1 qc gear storage container. It holds 8 sets of gears. Asking $20
used GM system 1 cleanable oil filter. Asking $35
used KSE mount. This is the bolt on mount that mounts the KSE pump to a Bert bellhousing. $20
New blue neck collar. Its the foam style with blue cover. Never out of plastic $20
New bead breaker. $20
Carb hats 1-cv, 1-willys, . Asking $5ea
2 jaz overflow tanks. Asking $10ea
gilmer water pump/crank pulley set-up. Its complete with the mandrel. $65
1 PPM double ajustable jbar. $35
6 NEW Napa gold 14x4" air filters. Its a sealed case. I switched to the r2c this year. $50 for the case
New sweet splined steering coupler in package $40
Hex steering wheel couplers. Asking $10ea
2 6 Blade fans. Asking $10ea
3 used throttle pedals. $10ea
used fuel cell cap. large d-ring style $10
2 used 1/2" sure seal for air cleaner bases. $5 ea
Lead that has been formed into ballast for racing purposes. Only have about 1100 lbs left as its been selling fast. Will sell for $1 per pound and ship up to 68 lbs at a time threw the USPS for $12.95 in shipping. Or will sell it in large lots for less.
Many misc items like new in box MSD stuff, new boxes of rivits, new fuel pumps, fan and carb spacers, TONS of aeroquip lines and fittings, misc rocker arms, axles, axle tubes, fiberglass roofs, and just lots more misc items i've aquired in my years of parts sales (there $1000's in just misc little stuff).
Like said above everything is going down the road asap. Call text or pm for more info. 815-990-8865