howe blue max a arms

[ilustfordust]

Do they make a 11 1/2 split one for bolt in balljoint for black front end rocket

[stillfast]

Not sure on Howe, but I think Port City has them for a black front end car.

[ilustfordust]

Can you remove cross shaft to install inside frame on lf and run the screw in type

[sj valley dave]

How do you remove the cross shaft? usually you have to cut the plate where the bolt in goes and then you can remove clips and pull shaft out...With a screw in type, not sure if that is doable...

[TALON75]

Howe makes them so the cross shaft can be removed and replaced . I like Joes a-arms because the a frame bolts to the cross shaft making it easier to bolt it to the inside .

http://www.joesracing.com/images/detailed/Exploded_viewLO-RES12958968604d3dd11c7d059.jpg

[ilustfordust]

Rocket says run 15 degree and joes only makes 10 degree whats the difference

[sobe92]

5* of ball joint angle is the only difference. we run a joes with no issues

[TALON75]

Joe's will make it for you, pretty sure it won't cost anymore just takes a couple extra days. We run a blue front rocket without issue on the ten degree arms.