PDA

View Full Version : Grt mod



jetgraphics
03-25-2012, 11:27 AM
I have a 2004 grt mod and i keep taking out the rear seal on the tranny out put shaft .the yoke sticks out around 3 inches out of the tranny. and who makes a good chain limiter

scootbus
03-25-2012, 01:02 PM
Grt sells a nice ajustable one

powerslide
03-25-2012, 08:36 PM
I have a 2004 grt mod and i keep taking out the rear seal on the tranny out put shaft .the yoke sticks out around 3 inches out of the tranny. and who makes a good chain limiter

Is your car over or under rail? How much drop
Do you have measuring just inside the birdcage? Sounds like you need a shorter driveshaft

jetgraphics
03-25-2012, 09:07 PM
its under but the guy before me cut out the left side so it droops a alot so i made my own limiter and tried it this weekend and it was stupid loose coming out of the corner took the chain off and it wasnt loose just took out the seal

junebug
03-25-2012, 09:38 PM
shorten the driveshaft an inch or so....just be sure it doesnt pull out the other way on braking