PDA

View Full Version : Wedge ?



Racer7R
04-22-2012, 12:58 PM
OK, I do not have access to a set of scales at this time. So I am checking my setup with the jack and socket method. The car is a mono leaf mod with a lift-bar. When I jack it up I get roughly an inch and a half maybe 2 inches of wedge. Where would this put me as far as cross-weight? Any help is appreciated.

Dirtrunner35
04-22-2012, 07:56 PM
Guessing about 100 lb or just over, how do you like the mono leaf car ? I used to have one.

Racer7R
04-23-2012, 08:22 AM
LF = 650
RF = 600

Have not had the car on the track yet. I have ran stacked leaf cars but this is my first venture with a mono leaf car. Thanks to both for your help!

Dirtrunner35
04-24-2012, 08:53 PM
On my car when the track was tacky or heavy, I did very well against the 4 -bar cars. On a slick track couldn't get the bite like a 4 -bar car. So I floated the RR, added 2 front halfs of a leaf spring to the Left side and removed the fifth coil, then I had more forward bite.