dirtrace09
04-23-2012, 10:44 AM
I have a 355 SBC that is complete but needs a new block.
GM forged crank
Carrillo 6" rods
Wiseco forged flat top pistons
Canfield ported aluminum heads (angle milled) with matching victor jr intake
Isky roller cam
Howards lifters
7 quart racing pan with melling pump
new water pump with reduction pulleys
completely arp studded motor
the block has steel caps but has a crack in the block, so it will need a new one
This is everything you will need to put into a new block. Not cheap parts.
$2000 obo
GM forged crank
Carrillo 6" rods
Wiseco forged flat top pistons
Canfield ported aluminum heads (angle milled) with matching victor jr intake
Isky roller cam
Howards lifters
7 quart racing pan with melling pump
new water pump with reduction pulleys
completely arp studded motor
the block has steel caps but has a crack in the block, so it will need a new one
This is everything you will need to put into a new block. Not cheap parts.
$2000 obo