PDA

View Full Version : power glide help



shadetree17w
04-23-2012, 06:39 PM
tranny mount steel or rubber with solid engine mounts thanks in advance

Chico
04-23-2012, 06:46 PM
Mid plate if allowed with rubber mount tho some let it hang otherwise I'd use a polyurethane also be sure dowels are plenty long and I use lock tite Just for ins jmo

racinjason29
04-25-2012, 05:48 AM
Steel mount, reason why is if you run a rubber tranny mount with solid motor mounts, your tranny will have a "spaghetti" like effect, therefore cracking your bellhousing or tail shaft.

Chico
04-25-2012, 01:59 PM
I agree to a point I misread the post on the solid mount I've used a poly mount also in this case But solid may be better That's just my way lol

dirty white boy
04-28-2012, 01:40 AM
rubber or poly,..if go solid then there be no way it can flex with chassis an sumptin gotta give! plus rubber an poly will give an separate if you wad it up...

shadetree17w
04-30-2012, 01:55 PM
i went poly ran 2 nights so far so good thanks for the help mike watson.