View Full Version : 2005 mastersbilt smackdown ride height
jac20
05-10-2012, 06:54 AM
what is the proper ride height on the right rear for a 2005 mastersbit smackdown chassis?
hall99
05-10-2012, 08:45 AM
I used to run mine around 7 3/8 to the axle tube.
Matt49
05-10-2012, 08:54 AM
7 3/8 is correct
jac20
05-14-2012, 10:45 AM
thanks much appreciated.
dbr25
05-14-2012, 03:10 PM
Don't mean to hi jack thread but I have a Smackdown copy and need some measurements. With a smack at ride height you just mentioned, measure from center of RR shock mount down to axle tube. Also need measurement from center of j bar mount(center of 2" square tube) to center of LR 4 bar mount. Thanks this will help me locate rearend left to right and correct ride height. My framerails are not in the same location as a smack.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.