Mosidebite
05-29-2012, 10:43 PM
Dart Cnc Pro1 227's
2.08/ 1.60 valves
Roller springs
T & D shaft rockers (1.5 ratio)
Heads, valves and springs have less than 10 nights on them.
Aluminum fabricated valve covers
Roller lifters and pushrods (for dart block)
Schoenfeld 1186 headers with schoenfeld mufflers. (no dents-no cracks) Fits Pierce and others.
Comp Cams Camshaft (this combo makes an HONEST-not an inflated engine builder's dyno- 635hp on a 410"
First $2,000 gets it.
618-554-6157
618-554-6157
2.08/ 1.60 valves
Roller springs
T & D shaft rockers (1.5 ratio)
Heads, valves and springs have less than 10 nights on them.
Aluminum fabricated valve covers
Roller lifters and pushrods (for dart block)
Schoenfeld 1186 headers with schoenfeld mufflers. (no dents-no cracks) Fits Pierce and others.
Comp Cams Camshaft (this combo makes an HONEST-not an inflated engine builder's dyno- 635hp on a 410"
First $2,000 gets it.
618-554-6157
618-554-6157