PDA

View Full Version : Jay D1ckens 430 13 degree



Jonezy
05-30-2012, 02:29 PM
Original Jay D1ckens motor. Motor was completely gone through and had all new parts installed by a local builder with a great reputation. Only thing that is original is the head castings, block, and intake. Currently has 600 laps on all internals. Block and Heads have never been hurt. Neither has been decked and have a lot of life left in them.

Extra Light Brodix Aluminum Block 50mm
Dart 13 degree Heads by D1ckens
Ported 2 Piece Intake with Spider from D1ckens
Callies Magnum XL Crank
Oliver 6" Billet Rods
Diamond Pistons with Total Seal Rings
Oiler Valve Covers
Clevitte Bearings
Cloyes Timing Chain
Customs Cam 50 mm roller
Crower Lifters
PSI Valve Springs
Jesell Rockers
MSD Distributor
Peterson Pop-Off Valve

I have the cam card and most all of the information of the parts that are in the motor. We have been extremely happy with this motor. It is really smooth and gets off the corner well. Asking $13,500 for the motor without the carburetor. Can Add a Stealth carburetor for an additional $750. Feel Free to call. 606-831-0541 or 606-923-5736. Also can send pictures

Jonezy
06-02-2012, 08:35 AM
This motor has won races at KC, Beckley, Southern Ohio, and Willard. Finished 2nd twice at PRP and Southern Ohio, and Finished 2nd in the Harvest 50 at Skyline. Has set fast time 6 times: 2 PRP, Southern, Beckley, Willard, and KC.

Jonezy
06-14-2012, 07:56 AM
SOLD. Thanks