PDA

View Full Version : 05 pierce clamp car " Tight on entry"



jfleming
06-17-2012, 01:13 PM
ls 4bar, rs Zlink, standard holes and the car is just to tight turning in

800 700
200 200

Car is pretty good when the track dries out but way to tight on entry. I either have to roll out way to soon to get the car to pivot or I have to run it in way deep and use a lot of brake.

My thoughts:

225 LR and move the right reare a round or two back on both bars
maybe get away from Z link
any other ideas

bob75
06-17-2012, 04:24 PM
soften up the front pierce starts at 750 lf 650 rf, i would try a 700 lf stay with a 650 or 600 on right front

silver6sp7
06-18-2012, 06:50 AM
I went to a pair of 650's front, 250 lr and 200 rr.... helped! I am also 4bar left and Z right..