97-98 grt rear end question

[racer21]

Looking for a measurement to make sure the rear is in correct location side to side,i know most will say 18-18 1/2 on the jbarto start but with all the different pinion and fram sliders
these numbers could be off,im just wanting to make sure it right,thanks in advance

[2rs]

Looking for a measurement to make sure the rear is in correct location side to side,i know most will say 18-18 1/2 on the jbarto start but with all the different pinion and fram sliders
these numbers could be off,im just wanting to make sure it right,thanks in advance

call grt and ask Joe what the rear end should be from side to side from the bird cages to rotors,(but you need to know your axle lenghts) this will get you right on that part then do your 18 to 18 1/2 j bar.