PDA

View Full Version : Masters smack car side bite


teammastersbilt
06-25-2012, 09:32 PM
Hey guys I have been free on entry in slick conditions and was wondering if any one has had any luck running a 250 RR spring I have been running a 225. I have been running the RR bottom rod in the bottom hole and shortened the RR rods 2 turns and don't seem to have enough side bite.
MasterSbilt_Racer
06-25-2012, 09:37 PM
You are going to need to post more setup info like springs and wheel weights. How much rr shock travel are you getting? rf shock travel? A 250 can work. It could also make you worse if you can't get the weight up and over on it during chassis roll.
11jcr51
06-26-2012, 06:30 AM
Hey guys I have been free on entry in slick conditions and was wondering if any one has had any luck running a 250 RR spring I have been running a 225. I have been running the RR bottom rod in the bottom hole and shortened the RR rods 2 turns and don't seem to have enough side bite.

We run a 250 in the RR and moved the shock 1 hole in board and have had success.