metric bodies

[hly]

Can someone post pics of different bodies on metric chassis other than metrics.
I seen a body on sybesma graphics the green and white car can someone tell me the year model thanks

[stockcar5]

here is mine. its a 88-96 fwd cutlass body.

https://sphotos.xx.fbcdn.net/hphotos-ash3/551262_10150635214561689_1049125321_n.jpg

[hly]

here is mine. its a 88-96 fwd cutlass body.

https://sphotos.xx.fbcdn.net/hphotos-ash3/551262_10150635214561689_1049125321_n.jpg
That's what I'm looking for

[gun91]

That's a sharp car!!

[hly]

Any others?

[Drake Racing]

Hey stockcar, I use the same body on my car but had to cut the center out of my
nosepiece to make everything fit with the stock hood. What did u do to make the
nose work without cutting it down?

Curt Drake
stockcar #55x

[stockcar5]

Hey stockcar, I use the same body on my car but had to cut the center out of my
nosepiece to make everything fit with the stock hood. What did u do to make the
nose work without cutting it down?

Curt Drake
stockcar #55x

i flare the front on the fenders out some and then attach the nose to the tops of the fenders. then i cut a v slit in the top corner of the nose and pull the sides in and trim it.

[Drake Racing]

Thanks, Ill have to try that next time I replace the nose.
Right now I have an Oldsobile!

Curt Drake
Stockcar #55x

[stockcar5]

thats correct its a hood made from a sheet of .040 aluminum. to make one you have to be sure and get a 5ft wide sheet. get a 5 by 10 and you can do 2 hoods easily. took 14lbs off my front end so i think it was worth it.