SpeckRacing
07-15-2012, 09:04 AM
2009 IMCA Sidebiter modified-
4-link, about 30 shows (never bent), Ebach springs w/recently rebuilt AFCO shocks (7 total), dyno’d 398 engine, Falcon tranny, choice of gears (5.14-6.20), misc front end parts, extra rims & tires, runs on 112 octane gas, MSD ignition, greasable swedgetubes, built by Ruter Racing (Kanawha, IA). Race-ready $17000; w/all gears, scales, caster/camber gauge, fuel, misc., $20000; w/enclosed trailer $25000.
Possible partial trade for good bumper-pull camper.
Parts-
9” Ford full-spool gears-5.14, 5.29, 5.67, 5.83, ($350 ea);
9” Ford full-spool gears-NEW 6.20, 6.50 (used 1 night) ($450 ea);
scales($800);
tire turn tables ($125/pr);
Pro-Series PSE TC-260 tire machine & Kwik-way 250 spin balancer ($1800/pr);
caster/camber gauge; 15 gal fuel; tire grinder; 2 stagger gauges; 2 extra lower A-arms; misc upper front suspension;
398 SBC longblock-
Dyno’d, 4-bolt main, splayed main caps, 4340 steel crank, Comp Cam, EDM lifters,special Diamond forged pistons w/plasma Moly rings, H-bearings, Eagle H-beam rods w/L19 bolts, 3.875 stroke Comp Star crank, fully-ported RHS 2.20 49cc heads, Kevco 8 qt pan. Balanced, fully machined & assembled at Parker Machine (Newton, IA). Dyno sheets available.
1997 Owen enclosed trailer-
white, 28”, 2-5000# axles, newer Interstate deep-cycle battery, winch, side door, back ramp door, bench, toolbox, shock rack, compressor w/plumbed airlines, conduit wired w/breaker (all runs on compressor with 1 plug-in), $5000
!!!!SERIOUS INQUIRIES ONLY!!!!
Email rldnjspeck@yahoo.com or call Rick @ 641-499-2190 BEFORE 7:30 pm
Garwin, Iowa
4-link, about 30 shows (never bent), Ebach springs w/recently rebuilt AFCO shocks (7 total), dyno’d 398 engine, Falcon tranny, choice of gears (5.14-6.20), misc front end parts, extra rims & tires, runs on 112 octane gas, MSD ignition, greasable swedgetubes, built by Ruter Racing (Kanawha, IA). Race-ready $17000; w/all gears, scales, caster/camber gauge, fuel, misc., $20000; w/enclosed trailer $25000.
Possible partial trade for good bumper-pull camper.
Parts-
9” Ford full-spool gears-5.14, 5.29, 5.67, 5.83, ($350 ea);
9” Ford full-spool gears-NEW 6.20, 6.50 (used 1 night) ($450 ea);
scales($800);
tire turn tables ($125/pr);
Pro-Series PSE TC-260 tire machine & Kwik-way 250 spin balancer ($1800/pr);
caster/camber gauge; 15 gal fuel; tire grinder; 2 stagger gauges; 2 extra lower A-arms; misc upper front suspension;
398 SBC longblock-
Dyno’d, 4-bolt main, splayed main caps, 4340 steel crank, Comp Cam, EDM lifters,special Diamond forged pistons w/plasma Moly rings, H-bearings, Eagle H-beam rods w/L19 bolts, 3.875 stroke Comp Star crank, fully-ported RHS 2.20 49cc heads, Kevco 8 qt pan. Balanced, fully machined & assembled at Parker Machine (Newton, IA). Dyno sheets available.
1997 Owen enclosed trailer-
white, 28”, 2-5000# axles, newer Interstate deep-cycle battery, winch, side door, back ramp door, bench, toolbox, shock rack, compressor w/plumbed airlines, conduit wired w/breaker (all runs on compressor with 1 plug-in), $5000
!!!!SERIOUS INQUIRIES ONLY!!!!
Email rldnjspeck@yahoo.com or call Rick @ 641-499-2190 BEFORE 7:30 pm
Garwin, Iowa