How stiff of RR spring??

[c4racin]

what is the stiffest RR spring you guys have tried??

currently running a 250 was on a 225 and car is better on entry and exit. still a little free in and snug through middle and off.

01 rocket blk front end

[dualdj1]

what is the stiffest RR spring you guys have tried??

currently running a 250 was on a 225 and car is better on entry and exit. still a little free in and snug through middle and off.

01 rocket blk front end

we'd run up to a 400 on the cage on our rayburn. swing left z right, short straight ls panhard, and worked fairly well as the track slicked. heard of some other rayburn guys running real heavy, way more than that still using right side purple bar/left swing/z right. haven't changed yet since we went to the pierce car with 4/4.

[MasterSbilt_Racer]

On a 4 bar car, I have used from 150# to 350#. I will try anything.

[Egoracing]

On a 4 bar car, I have used from 150# to 350#. I will try anything.

Ran about a 400+ one night at East Bay when it was rubberd up and locked down. It was a 375 with 2 spring rubbers in it. That track killed a set of D55's that already had a heat cycle in 50 laps.

[jedclampit]

Successfully, with the 2"- 01 -black car (a personal favorite of the many Rockets I've worked with), 250# per my notes.
Tried... up to 300#, unsuccessfully!

[jedclampit]

c4racin
You need to make some room in your IN box, pm won't go thru.
Try to get with you late friday or between 10- 2 Sat .