View Full Version : Winters Quickchange Question
greenmod
08-07-2012, 11:29 AM
Anyone know of anything that would cause the Pinion to leak grease besides the pinion seal? Changed the seal twice in the past 3 weeks and it still leaks!
JAMESGANGRACING
08-07-2012, 03:29 PM
Put some silicone on the bolt that holds the yoke on.
greenmod
08-08-2012, 03:10 PM
Its pooling up in the seal, leaking from the two rings around the pinion shaft!
racin6mod
08-09-2012, 06:11 PM
Put some silicone on the bolt that holds the yoke on.
would add make sure the vent is working sometimes gear lube seats in the fulltube/vent and wont let the gear case breath so it pushes gearoil out at the next easiest spot a seal.
mod 44
08-09-2012, 10:59 PM
when you pull the seal out is there a cover on the bearing or can you see throw it if you can see throw it you need to change it i had the problem with mine put some silcone on the washer and bolt it up
MQueen
08-21-2012, 01:54 PM
Make sure you are using the correct seal, they make them with the lip facing in and out depending on which way your seal installs.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.