View Full Version : falcon rear tailhousing seal
buzz51
08-13-2012, 01:05 PM
Hi looking to change out the rear tailshaft seal where drivershaft goes in. Is this an easy deal ? Is there a snap ring that holds the seal in ?
any advice is appreciated. thanks
rubbinsracin
08-13-2012, 01:26 PM
Very easy. Pull the retaining ring out. Pull the seal and reverse what u just did. Helps to punch a hole in the seal and hook it to pull it out. Be careful because the tailhousing is very soft aluminum. . We also put some grease on the seal so it slides in nicely.
buzz51
08-13-2012, 11:08 PM
thanks for the tip. looks like the retaining ring could be taken out with screwdrivers and then pop the seal out...
I will give it a shot. thanks !
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.