side bite

[57m]

hi got a question maybe someone could explain would we could do. we'll last night we ran and the car needed more side bite or something good to the middle but coming off not so good. we have a 2008 masterbuilt it has 525 lf 425 rf lr250 rr225 the lift bar spring is all the way forward. the j bar down on pinion and 7 1/2 up on frame the bars are 3 down on left side top bar and 3 up from bottom on lower bar the right side is 5 down on top and bottom on lower any suggestions.

[Graff Spee]

If you are good in the middle, you don't need more side bite. Try some more wedge.

[57m]

we checked the tire temps and they were 100 on the lf rear and 130 on the right rear what would be the best way to even them out thanks.

[Egoracing]

Try dropping the left rear bottom bar on the chassis, this will not effect much entry thru center but will add LR drive from the center off while on the gas.

[JustAddDirt]

Take off the 250 LR spring and put a 200.
More preload on the softer LR spring should add traction.

Just a suggestion.