latemodel21m
09-26-2012, 08:55 PM
07 Mastersbilt and Ford 358 Engine Fresh
I have a 07' MasterSbilt Smack Down Race Ready with a 358 windsor steel head and steal block motor. The car has never been hurt or bent or clipped. Has Winters 4:86 rear, WMF Bearing Birdcages, Wilwood hubs and brakes,Peterson 4 stage Dry Sump Oil System, Performance Rod and Custom Oil Cooler and Radiator, 32 Gallon ATL Fuel Cell, Bert Bell Housing, Bert Mag Ball Spline Trans, Tool Much to list, Will sell it anyway you want it.
Race Ready 15,000
Roller no motor, trans, oil system, 5,000
Ford 358 Limited Engine,
Fresh has 0 Laps since gone over and ready to go
Victor Jr Intake
Edlebrock Water Pump
SRP Dome Pistons 13.5 to 1 Compression .30 over
Eagle H-beam Rods, Stock Lenth
World Products Roush 200 Heads
MSD Distributor
Comp Cams Roller Rockers and Stud Girdles
ATI 50oz Balancer
Bert 50oz Flywheel
351W Stock Block board .30 over and convered over to dry sum oil system
Stock 351 Crank
Kevco Dry Sump Oil pan , I was using a 4 stage system on this
This engine always ran cool and never ran over 7300 rpm
Asking 5,500 obo CASH ONLY NO TRADES OR PAYMENT PLANS!!
Call Chad at 443 375 1844 or 410 374 4656 located in North Cental Maryland STUFF HAS TO GO , I do have pictures message me with your email adress and ill send them to you Thanks
I have a 07' MasterSbilt Smack Down Race Ready with a 358 windsor steel head and steal block motor. The car has never been hurt or bent or clipped. Has Winters 4:86 rear, WMF Bearing Birdcages, Wilwood hubs and brakes,Peterson 4 stage Dry Sump Oil System, Performance Rod and Custom Oil Cooler and Radiator, 32 Gallon ATL Fuel Cell, Bert Bell Housing, Bert Mag Ball Spline Trans, Tool Much to list, Will sell it anyway you want it.
Race Ready 15,000
Roller no motor, trans, oil system, 5,000
Ford 358 Limited Engine,
Fresh has 0 Laps since gone over and ready to go
Victor Jr Intake
Edlebrock Water Pump
SRP Dome Pistons 13.5 to 1 Compression .30 over
Eagle H-beam Rods, Stock Lenth
World Products Roush 200 Heads
MSD Distributor
Comp Cams Roller Rockers and Stud Girdles
ATI 50oz Balancer
Bert 50oz Flywheel
351W Stock Block board .30 over and convered over to dry sum oil system
Stock 351 Crank
Kevco Dry Sump Oil pan , I was using a 4 stage system on this
This engine always ran cool and never ran over 7300 rpm
Asking 5,500 obo CASH ONLY NO TRADES OR PAYMENT PLANS!!
Call Chad at 443 375 1844 or 410 374 4656 located in North Cental Maryland STUFF HAS TO GO , I do have pictures message me with your email adress and ill send them to you Thanks