Kojak_9x
10-08-2012, 09:01 PM
2008 Hughes Chassis, (Jason Hughes personal car in 2008) pull bar car.
Car has Howe ball joints, sweet box, integra gas shocks, 10 or less races on winters lw Q/C and BSB bearing birdcages, fresh 355 roller on gas with new holley lw carb, brinn trans, rev mount bell housing with kse pump.
Spares: uppers, lowers, spindles, driveshaft, balljoints, 6 or so sets of gears, wheels, tires, ect...
Complete turnkey minus seat $20,000 (plus spares)
Also can be sold race ready minus motor and seat for $10,000 (plus spares)
We will sell car as basic roller for $8,500 (plus spares)
this would be minus motor,trans, drive line, and seat.
32ft tri-axle trailer with new tires that includes air compressor, bolt bin, A/C, lots of cabinets, pit pal type acc.. & generator. ($8,000)
We have had the car for 2 years and it has been a strong fast car, we've raced mainly in Amarillo, TX but also in Las Cruces, NM, Tularosa, NM, and Albuquerque, NM. This car is a strong front runner and has won many races throughout its life. We're taking some time off racing, I'm very confident in this car and will miss it dearly.
If you are looking to get into modifieds we can sell our entire operation for $25,000. This includes turnkey race car, all spare parts, and the trailer. We are firm on our prices so please no low ball offers, thank you for your time.
We can send pictures of the car if your interested.
If interested please call (575) Six93- five84four
or email rayreeser@yahoo.com
see racing junk Ad #2770501
also have:
-07 D&M 4/4 $10k turn key / $6500 Roller see ad on here or Racing Junk Ad #2752954
-01 Pro Chassis 3 link roller minus engine/seat with Falcon trans/9 in w/ 583 gear (needs completely gone through, smacked the wall with it and has been sitting for a few years in the shop) defiantly fixable. I know it needs: j bar/mount, shocks, probably rf spindle, control arm, tie rods, body, swedge tubes. Car won 05 Clausen SE regional IMCA championship. This car was awesome!
$1700.
Call/ text Joe on the D&M & Pro 850-324-6938
Can put new complete bodies on for extra $1K
May trade for GM hotrods: chevelle, nova, camaro, ect...
All cars located in Clovis, NM
Car has Howe ball joints, sweet box, integra gas shocks, 10 or less races on winters lw Q/C and BSB bearing birdcages, fresh 355 roller on gas with new holley lw carb, brinn trans, rev mount bell housing with kse pump.
Spares: uppers, lowers, spindles, driveshaft, balljoints, 6 or so sets of gears, wheels, tires, ect...
Complete turnkey minus seat $20,000 (plus spares)
Also can be sold race ready minus motor and seat for $10,000 (plus spares)
We will sell car as basic roller for $8,500 (plus spares)
this would be minus motor,trans, drive line, and seat.
32ft tri-axle trailer with new tires that includes air compressor, bolt bin, A/C, lots of cabinets, pit pal type acc.. & generator. ($8,000)
We have had the car for 2 years and it has been a strong fast car, we've raced mainly in Amarillo, TX but also in Las Cruces, NM, Tularosa, NM, and Albuquerque, NM. This car is a strong front runner and has won many races throughout its life. We're taking some time off racing, I'm very confident in this car and will miss it dearly.
If you are looking to get into modifieds we can sell our entire operation for $25,000. This includes turnkey race car, all spare parts, and the trailer. We are firm on our prices so please no low ball offers, thank you for your time.
We can send pictures of the car if your interested.
If interested please call (575) Six93- five84four
or email rayreeser@yahoo.com
see racing junk Ad #2770501
also have:
-07 D&M 4/4 $10k turn key / $6500 Roller see ad on here or Racing Junk Ad #2752954
-01 Pro Chassis 3 link roller minus engine/seat with Falcon trans/9 in w/ 583 gear (needs completely gone through, smacked the wall with it and has been sitting for a few years in the shop) defiantly fixable. I know it needs: j bar/mount, shocks, probably rf spindle, control arm, tie rods, body, swedge tubes. Car won 05 Clausen SE regional IMCA championship. This car was awesome!
$1700.
Call/ text Joe on the D&M & Pro 850-324-6938
Can put new complete bodies on for extra $1K
May trade for GM hotrods: chevelle, nova, camaro, ect...
All cars located in Clovis, NM