Looking for an engine

[rickybobby23]

I am looking to get into super lates. I would like to find a good piece, but doesn't need to be top of the line due to the fact I'm on a budget, but don't want any junk either. Something used but not abused. Would prefer something close to drop in and go, but not a deal breaker if it isn't. Please let me know what you have through pm. All aluminum or steel block with aluminum heads...looking for either one. Thanks

[softshoe72]

I have an all aluminum fresh pro power 420 $18000 ..... No carb or dry sump Contact me at 7047465255 if interested

[randall]

All steel 415 good stuff,Crower,Dart,Botie,complete Carb, Headers $6500 706)581)7043

[GRT32]

all alum 18 degree 362, chevy, heads, donovan block, complete no carb or dist. 423 715 7322 $4800

[racer15]

388 all aluminum, 200 laps since rebuild in 2011. Brodix block, set up for 5 stage oil pump. 18* gm aluminum heads with Del west titanium valves, jesel shaft rockers. Block was brand new in 2011, I switched from steel to aluminum block. 4.135 bore, 3.625 stroke eagle crank with eagle H-Beam Rods. JE Pistons. Comes with MSD Distibutor, water pump and pulleys, "JD Carburetor, brand new in 2011, Barnes 5 stage oil pump, with oil lines, 200 laps on pump since it was re-built at Barnes.
$7500.00 OBO
Ed Williams (630)525-5861

[In The Groove]

We have a fresh clements 430 sb2 and a fresh 430 15 degree with a brand new top end.will also have a fresh 13 degree 430 clements in about 2 weeks.Price ranges are from 12,500 to 14,000.call jerry if intrested 865-250-7985

[rickybobby23]

Back to top....

[q7racing]

i have 408 all alum sb2,needs assy ,all parts,even have all new bearings,gaskets,very nice engine.

[rickybobby23]

ttt....anything else out there? still looking around.

[andy16]

358 sb2 steel block alum head fresh 0 laps best of everything w oilpump and tank plumbed for a rocket w all lightweight crimped lines not fired since freshened by buck racing engines in nc i have all paperwork and reciepts guaranteed in perfect condition get everything but the carb for 8,000.

bryant crank
lentz rods
4.165x3.28x6.200
12 to 1 comp
all matching parts no junk
vspring sprayers
5 stage oil w weaver pump n steffs tank nice condition
plumbed w crimped lines all black
pic on racing junk

[ev36rayburn]

We have a 435 13 degree cornett chevy with 6 nights on total freshen. Had two pistons burn and then break. This was due to fuel pump failure and starved engine of fuel and leaned it out.Brodix block with new sleeves, new pistons, dyers rods checked and all had new bolts etc, new valves and lifters. We bought tbis motor this past season from dale beitler in which austin hubbard and steve francis drove for the couple seasons prior. We paid 17250 for it and had 5 nights before it broke and 6 after rebuild and only two features due to having other car issues. It cost a little over 4000 for all repairs. Also has new water pump and pulleys and new fuel pump. Will include the carb that came with it and air cleaner and filter, all from brasswell. 20,000 for entire package race ready. We are downsizing. Pm me if interested

[dukhtr69]

I got a fresh supr spec engine steel block alum heads all good parts, carb, headers, $6000. call or text for more info 662-213-7526

[BIRD1]

Call ronnie @ race engine design (R.E.D)

[dirtcar08]

I have a Runion 430 tall deck 18 motor has little time on it since redo with new braswell carb and and the complete dry sump for 14,000. contact me at 217 836 8018

[cameron/mann racing]

Have a 402 12 degree head all aluminum chevrolet built by Leggett Engine Research in Maryland. Great engine for 3/8 mud or slick track. Motor had a complete freshen over the winter and has only 200 laps on it. Engine won 8 features in 2011. Comes with new carb and beyea headers. call Pete Cameron at 301-481-1290 for details. 14,000 obo.

[davidames]

Malcuit 430 - RM#879
13 degree
Dart Block
Dart heads
Fresh in 2011, only run 450 laps since
New Parts when freshened:
Pistons, Cam, Lifters, Valves,Retainers,springs,rod bolts
Dyer Rods
Lanadi Crank
All the best stuff and very strong - we just have 2 430's and need one since we run Spec alot

Price includes Beyea SS Headers and Stealth Carb!

Only $17,500 OBO

Call 256 five zero eight -6116
or email David@Penta-inc.com
Pics and details available

[dualdj1]

If you are just starting in Lates, help yourself out in learning and get a reasonably powered engine. ie 650-750, steel block/alum heads. save some $ to start and get a feel for the car with a little lower power. Then after first year move up to a bigger one.

[mcrs00]

Ihave a 415 clements 18 degree dart aluminum heads , bowtie block, all the good parts $10,000. give me a call cell 1-573-619-4960 or eve after 6-30 central 1-573-896-8680 thanks MIKE CRUMP..

[swhite11]

I have a 415 with a dart little M block that only 3 years old. block is still std bore 4.125. It has top of the line parts. Broxic 18* professionally ported w/wilson intake, shaft rockers, ati balancer, aluminum dry sump oil pan complete $8500. 720hp

I also have a all aluminum 415 12x12 brodix heads, rodeck block 4.135 bore only raced 2 seasons. the engine is about 10 years old but never raced much. this engine made 770hp. this engine is complete and ready to go $13,500

I build engines and sell them for people. Give me a call and let me help you 330-806-7599.