View Full Version : Looking for a good deal on 415-430 aluminum engine 15* or better heads
WENDEL ROCKET
12-30-2012, 01:44 PM
Looking for a good deal on 415-430 aluminum engine 15* or better heads. thanks
perfconn
12-30-2012, 01:54 PM
#1- 13*-Originally a Clements engine-350 mains 2 inch rods-Brodix block-Dart heads-1.75-1.70 Jesel rockers-Jesel. 875 lifters-King crank-Crower Maxi light rods-Racetec pistons-2 piece intake-50mm cam-ATI balancer-Edelbrock waterpump-CV billet fuelpump-MSD distributor-fabricated aluminum oilpan w/3#12 pickups-fabricated valve covers-pullys-lots of new parts-14.43 compression.
#2- 15* New HVH Brodix topend-Dart block-King crank-Carrillo rods-350 mains 2 inch rods- Racetec pistons-1.85-1.80 Jesel rockers-50mm cam-.903 Crower lifters-MSD crank trigger-MSD distributor-ATI-RCR waterpump-CV billet fuelpump-fabricated valve coversw/oilers-fabricated aluminum oilpan w/3 #12 pickups-1 piece intake-pullys-lots of new parts-14.00 compression
Both of these engines are 430ci.These engines are fresh but not dynoed yet.Engines have new valve springs,new retainers,new pistons,new rings,new bearings and some have other new parts.The 15* has a whole new topend and the 13* has new lifters.
You can buy either one of the engines for $13,000.00
If you have any questions you can email me at terry.marciaburnett@gmail.com or call me at 1-865-567-6943 no pictures right now but will have some later.
go2fast
12-30-2012, 04:25 PM
Have one dart block 4.155 bore dart heads 13deg new callies xl crank 3.875 crower max rods 6.000 comp cam 55mm .903 lifters piston rings 90 laps 20,000.00
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.