GRT yoke

[merc123]

I've got an '02 GRT. I called GRT and they said 38 1/2" drive shaft but forgot to ask what yoke. I keep reading "regular yoke" but don't know what that is. It's a Bert tranny and not sure if the splines go all the way up. What should the barrel length be?

Also can you tell if it's going to come out if you drop the suspension to full droop?

http://www.daymotorsports.com/prodpix/Slip-Yoke.jpg

[grt74]

i think we used to use the 8"one, i do know its the longer one,it will actually go in the trans at full drop so check it and see if it bottoms out,if it does youll need to adjust for that,our drive shafts are 38.5 but we use the ballsplines

[AmickRacing]

When I ran my '03 GRT I ran the 8" long yoke. The longer the better, especially with all the movement in the rearends now-a-days (even on old cars). I can't 100% remember, but I believe my driveshaft was 38 or 38.5"

[merc123]

Thanks. I will check it out.