how to decrease cross?

[regor]

I have an IMCA souther sport mod. I had it scaled today. Total weight is 2462 with me in the car (210 lb). Here are my corner weights: LF: 613 RF: 528, LR: 734 RR: 587. That equals 54.7% left, 53.6% rear, and 51.3% cross. There are no extra weights attached to the car.

Any suggestions on where to add weight to decrease the cross %? Thanks for any advice.

[Confused?]

The car should have spring adjusters on all four corners. Put rounds in the LF and RR, and take rounds out of the RF and LR to decrease LR bite.

Have you driven the car yet? 150lbs. LR bite may be a good starting point.

[xxxmod]

Over the rearend housing in the middle of the car...keep the LR at 745