PDA

View Full Version : loose in mid turn



bluemod
05-05-2013, 08:09 AM
Getting in car is good but in the center car gets alittle loose. what can I do to help this? car is good every where but center turn.

Confused?
05-05-2013, 09:13 AM
Are you on the gas yet or not? If not, pick up the throttle a little sooner.

bluemod
05-05-2013, 11:39 AM
its on throttle that its loose

Confused?
05-05-2013, 12:11 PM
Increase LR bite a little. Not much or it could affect your entry.

Can your pull-bar be moved to the left some? This can help as well.

bluemod
05-05-2013, 03:05 PM
do u mean move left of the rear housing or the frame because I can do both

jsf74
05-05-2013, 06:44 PM
Why does moving pullbar shock side to side change anything?

Confused?
05-05-2013, 09:29 PM
I would move both ends. The rear mount has a bigger effect than the front. But, I like to have the bar facing straight or slightly right towards the RF wheeel.

jsf74, moving the pull-bar side to side, changes the loading on the rear tires. Moving it to the left will load the LR tire more. Moving it to the right will load the RR more. The shock can be moved as well but this will have a bigger eefect on entry. Moving the rear mount of the shock to the left will tighten entry some. Moving it to the right will have the opposite effect. This is provided the front mount does not move right or left.