View Full Version : new to QC game and questions ?
rustymod
07-07-2013, 11:17 AM
picked up used QC and now have questions always ran Ford 9 inch, so this deal is new to me. first off have to switch tubes...but what axles are needed to make it a 60 inch centered ?
any info is appreciated. thanks
mudeater18
07-07-2013, 01:03 PM
Both axles should be 30.5".
not clamped up
07-07-2013, 03:52 PM
picked up used QC and now have questions always ran Ford 9 inch, so this deal is new to me. first off have to switch tubes...but what axles are needed to make it a 60 inch centered ?
any info is appreciated. thanks
Make sure you know what the ring and pinion is,486 or 411 it will make a BIG difference on what gear you need.If you have a 9'' with a 650 to be the same with a quickchange with a 411Ring and Pinion you would be close to the 9'' with a 690
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.