wieoy
08-05-2013, 05:34 AM
3 Steps to Retrieve Images from Olympus Camera, As is familiar, Olympus cameras are spread all over the world.
Just a few days ago, Olympus released X-560WP,which has good water-proof ability, high ISO and shutter speed. It decreases the probabilities of image fog and supplies as much as 18 shooting scenes, including figures, nightscape, landscape, movement, etc.
But on one hand, we like the new experience cameras provide us; on the other hand, we worry about the image loss which may occur. Image loss is a kind of problem we might meet while we are capturing. Sometimes it is because of our carelessness, such as accidentally deleting or formatting, while sometimes it is because of unpredictable factors, like power off, virus infection, or the sudden failure of card. But how can we Retrieve images from Olympus camera?
Normally, we can Retrieve images by some photo recovery software (http://download.cnet.com/Hodo-Photo-Recovery/3000-2248_4-75876050.html). Before retrieving images, you should remember do not put more files or another data in the same position where the lost images were stored. Because after the images were lost, the data itself isn't lost; just the area where the lost images were stored is now marked as free space for other new files to be written. So once you put other data in it, this free space will be overwritten, which makes it difficult to Retrieve lost images.
Download free, install and initiate Hodo Photo Recovery (http://www.goshareware.com/photo-recovery.html). Here's the 3 steps to Retrieve images:
Retrieve images step 1:
Connect your camera to the pc. If your lost images are in the card, getting a card reader and connect it to your computer is OK. Once the device can be detected, it can appear as a drive letter like (F :) in your computer.
Retrieve images step 2:
Choose the camera or the card (where your lost images were stored) as a target disk, click NEXT button, and then the scanning process begins. At that time, check if the lost images is usually previewed in the thumbnail. If they are
recoverable, find the full version.
Retrieve images step 3:
Save the recovered photos in another place, not normally the one where the lost images were. As an example, if you want to Retrieve images from partition H:, you should specify a folder to save lots of the photographs in partition E: or other partition, not partition H:.
Stick to the above 3 steps one after the other, you will find retrieving images isn't as difficult since you thought, and photo recovery software is very useful.
Just a few days ago, Olympus released X-560WP,which has good water-proof ability, high ISO and shutter speed. It decreases the probabilities of image fog and supplies as much as 18 shooting scenes, including figures, nightscape, landscape, movement, etc.
But on one hand, we like the new experience cameras provide us; on the other hand, we worry about the image loss which may occur. Image loss is a kind of problem we might meet while we are capturing. Sometimes it is because of our carelessness, such as accidentally deleting or formatting, while sometimes it is because of unpredictable factors, like power off, virus infection, or the sudden failure of card. But how can we Retrieve images from Olympus camera?
Normally, we can Retrieve images by some photo recovery software (http://download.cnet.com/Hodo-Photo-Recovery/3000-2248_4-75876050.html). Before retrieving images, you should remember do not put more files or another data in the same position where the lost images were stored. Because after the images were lost, the data itself isn't lost; just the area where the lost images were stored is now marked as free space for other new files to be written. So once you put other data in it, this free space will be overwritten, which makes it difficult to Retrieve lost images.
Download free, install and initiate Hodo Photo Recovery (http://www.goshareware.com/photo-recovery.html). Here's the 3 steps to Retrieve images:
Retrieve images step 1:
Connect your camera to the pc. If your lost images are in the card, getting a card reader and connect it to your computer is OK. Once the device can be detected, it can appear as a drive letter like (F :) in your computer.
Retrieve images step 2:
Choose the camera or the card (where your lost images were stored) as a target disk, click NEXT button, and then the scanning process begins. At that time, check if the lost images is usually previewed in the thumbnail. If they are
recoverable, find the full version.
Retrieve images step 3:
Save the recovered photos in another place, not normally the one where the lost images were. As an example, if you want to Retrieve images from partition H:, you should specify a folder to save lots of the photographs in partition E: or other partition, not partition H:.
Stick to the above 3 steps one after the other, you will find retrieving images isn't as difficult since you thought, and photo recovery software is very useful.