PDA

View Full Version : Carb help



mignum
08-15-2013, 09:10 PM
When I fire the motor it runs for just a split second and dies and will not re-fire until I give the throttle a squirt, after I get it going it idles fine. What's up with that? I'm thinking it may be jetted too rich. When I tore it down for a freshin up last year the pistons and heads looked way too clean like they were being washed down with gas, think this could be the problem?

usafracer
08-16-2013, 09:48 AM
That sounds more like a lean problem. Next time without touching the throttle give it a shot of gas down the throat of the carb and see if it fires.

mignum
08-16-2013, 04:25 PM
What's the problem if the gas down the hatch works?

perfconn
08-17-2013, 12:04 AM
Turn the 4 corner idle screws out a 1/2 turn

ToddSmith16
08-17-2013, 12:36 AM
Take both idle screws all the way in and then turn it 1 1/2 turns out.