PDA

View Full Version : 4 bar lengths



Flyin Iowan
08-18-2013, 09:17 PM
What would be the reasoning that you would run longer 4bars on the right side?

modrocket
08-18-2013, 09:35 PM
Id say It slows the indexing down,on the birdcage. Plus it wont, RR steer as much. It should take the bite out of the RR, and make the Lr, drive harder. Seems like it would have to take a substantial, length to see a difference.

ChadJacks
08-23-2013, 08:52 AM
It would take roll steer out of the car and make you loose. We never go longer than the chassis builders lengths but we do shorter them if the track slicks off to tighten us out of the corner.

modrocket
08-23-2013, 05:04 PM
Chadjacks How does taking rollsteer out, make you loose? And you make the RR 4bars shorter,to make traction? Explain this if you get a chance.

charcoal01
08-23-2013, 08:48 PM
Indexing of the rr spring. The shorter the bars, especially the rr lower will get into the spring harder and faster. It will mostly been felt on entry and through the center, but if you're caring enough speed, you'll keep the rr loaded and see increased side bite on exit.