View Full Version : 377 SBC Brodix Track1 Heads
mbrooks1986
08-23-2013, 12:48 AM
Great motor with less than 12 nights on fresh rebuild!
New Parts when rebuilt at beginning of 2013 have an * before part description.
Motor was only raced 11 times after rebuild. Didn't race much this year because of a project at home.
-377 Bowtie block
-Aluminum Brodix track 1 heads with extensive work by Ron's Porting Service With Matching Holley Intake
-Eagle H Beam Rods(6")
-4340 Eagle Crank (3.48 stroke/ 400 mains)
-Internally balanced
-4/7 swap
*-Cam Motions Camshaft
-SRP Pistons 9cc Dome
*-Gapless Rings
*-Double Roller Timing Chain
*-(Brand New With No Laps) Crower 1.6 aluminum Rockers
-Msd Distributor With Bronze Gear
-Fluid Damper
*-Pro/Cam Fuel Pump
-Water Pump
-Schoenfeld Headers
*- Clevite Cam, Crank, And Rod Bearings
Great Motor!!!!
Call Or Text For Information!
309-635-4891
$5000 ALL YOU'LL NEED IS A CARB AND GO!
TRADES CONSIDERED!
mbrooks1986
08-23-2013, 12:53 AM
The rocker arms are new because the rocker arms that were used on this engine were loaned to me. I have returned these to original owner and replaced them with crower rockers.
mbrooks1986
09-18-2013, 03:22 PM
Lower price $4500 will consider trades and credit cards are accepted!
dirtdodger
09-20-2013, 10:44 AM
any idea of what kind of hp and torque numbers are?
stilhead
09-25-2013, 11:25 PM
Are you sure it's a Bowtie block with "400" mains? Never saw a Bowtie block with "400" mains.
mbrooks1986
09-26-2013, 02:56 PM
any idea of what kind of hp and torque numbers are?
Not sure on torque or hp numbers, because this motor has never been on a dyno.
mbrooks1986
09-26-2013, 02:58 PM
Are you sure it's a Bowtie block with "400" mains? Never saw a Bowtie block with "400" mains.
Great motor with less than 12 nights on fresh rebuild!
New Parts when rebuilt at beginning of 2013 have an * before part description.
Motor was only raced 11 times after rebuild. Didn't race much this year because of a project at home.
-400 GM block
-Aluminum Brodix track 1 heads with extensive work by Ron's Porting Service With Matching Holley Intake
-Eagle H Beam Rods(6")
-4340 Eagle Crank (3.48 stroke/ 400 mains)
-Internally balanced
-4/7 swap
*-Cam Motions Camshaft
-SRP Pistons 9cc Dome
*-Gapless Rings
*-Double Roller Timing Chain
*-(Brand New With No Laps) Crower 1.6 aluminum Rockers
-Msd Distributor With Bronze Gear
-Fluid Damper
*-Pro/Cam Fuel Pump
-Water Pump
-Schoenfeld Headers
*- Clevite Cam, Crank, And Rod Bearings
Great Motor!!!!
Call Or Text For Information!
309-635-4891
$4500 ALL YOU'LL NEED IS A CARB AND GO!
TRADES CONSIDERED!
TRADES CONSIDERED!!!!!!!
rangerrandy
09-26-2013, 03:23 PM
is it 23 degree also is it 4bolt and what is compression, last were are u im in mich
mbrooks1986
09-27-2013, 01:10 AM
is it 23 degree also is it 4bolt and what is compression, last were are u im in mich
Peoria il, 23 degree, it is a 4 bolt main, and I will check with builder but I belive it's 11.5 on compression.
Depending on cash or trades I have 2 gm 400 blocks that could go with it and 40 gallons of 110 Sunoco fuel that I have left over from This year! Both 4bolt mains, both have been machined to build either a 406 or a 377, and one has billet Oliver splayed main caps!
newmod09
09-27-2013, 08:26 AM
How much for just the blocks?
mbrooks1986
09-27-2013, 06:06 PM
How much for just the blocks?
Call for information on blocks. 309-635-4891
mbrooks1986
12-05-2013, 09:00 PM
Still for sale open for options!!!
what kind of trades are you looking for
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.