racerman2000
09-04-2013, 11:41 AM
441 CI SBC 14 to 1 Compression Racing Engine (Run on Racing Gas or Alcohol)This is A new, ready to run 441 cubic inch small block chevy racing engine fresh off the dyno and ready to win races.It performed exceptionally well on the dyno putting out nearly 700 HP and will do the same in any car you put it into. All the R&D has been done for you just pop it in and go.Heads and intake have been fully ported & matched to A MR Gasket 5822intake gasket.Keep in mind this was not just A clean up port job they have been done in the ex ports and had many hours of work done under the seats and shaping on the the guide bosses to maximize flow.The intake is also very nice and has around 4 hours of work on it getting it just right. The short block has been professionally Race Prepped-Balanced-Blue Printed.I have full build and dyno sheets on this engine.Keep in mind this engine was built for racing,you can put it into any car you like as long as you plan on running racing gasor alcohol.This engine has a NEW Pro-Comp after market racing block with World Products steel racing cylinder heads.Here is a brief rundown of what parts are in this engine -----------------------------------------SHORT BLOCK--------------------------------------------------------------------- Block= 4 bolt with all 5 steel caps-Race prepped and drilled and tapped for dry sump system Bore= 4.125Stroke= 4.125Pistons= Mahle-Forged Flat-Tops Cam= Custom Cams Solid 4-7 swap small base Lifters= Howard 91118 with holes with PEP 7.900 hard push rodsRods= Eagle 5.950 with ARP2000 Rod bolts Crank= Eagle 4340 steel Internal Grind Balanced racing crank---------------------------------------Heads------------------------------------------------------------------------------Fresh World Products Steel Racing Heads with all new parts and Jessel Shaft Rockers combustion chamber= 63cc'sIntake Valves= Manley 2.08 Racing ValvesEx-Valves = Manley 1.6 Racing ValvesRockers = Jessel 1.65 Intake & 1.5 EX Part#STN-20010Valve Springs= Double Precision Engine Parts Racing Springs w/ Installed Height of 1.910 and 140L.B.of Seat pressureRetainers = Steel Precision Engine Parts part #VSR302AValve Locks = 7deg Hard steel Precision Engine Parts--------------------------------------------------------------------------------------------------------------------------Has racing aluminum water pump that has water line to the block,and racing High rpm pulleys with a racing 350 style harmonic balancer.Also has MSD Racing distributor and wiresand A fully ported Brodix High Rise Aluminum Racing Intake manifold.--------------------------------------------------------------------------------------------------------------------------This engine has been professional built-engineered and dyno tuned to win races. Call or text any time have Machine shop price sheets and have been doing this for over 25 years Just give A call I will work with you on the best price I can give you on any type of machine or engine work you need Thank You For Your Time:Adam 309-948-9980 P.S. I have many more shortblocks and complete racing and street engines in stock and can build any engine you have STREET or RACEThank You for your time: Adam 309-948-9980 Call or text any time$9.999