gm aluminum bellhousing (part #) fits a bert

[jayrace15]

Which aluminum GM bellhousing (part #) that fits a bert tranny are guys using?

[JustAddDirt]

Bert, or a Brinn race bellhousing.
Don't even bother with the GM stuff, it will crack and break

[racin6mod]

any of them will work fine the problem is ground clearance in a lm or modified and if you cut the bottom off it help clearance but the thing won't last long. get one with the dust cover so you don't scoop up dirt from the track.

the bert bell housing is just as bad about cracking might even be worse.you can go on ebay and buy a used nascar bellhousing for around $150 on up. the one I use is 4 years old now with no issues at all just can't run rear mounted starter or dry sump.they're made by quarter master.