PDA

View Full Version : Asphalt pull offs on 8" rims metric car



3-6 Racing
10-01-2013, 07:40 PM
Planning on running a big show that allows pull offs but I only have 8" rims would they work on 8" rims and what problems could it cause if any

RaceTechKs
10-01-2013, 08:36 PM
Yea you can run a 10 inch take-off on a 8 inch rim, You probably wont like the way it feels under you. If you can try to find some 8 inch take-offs and use them you will like those very well. If you can run a 10 inch wheel then your set....Just groove them up and needle them real good and they will work fine.

3-6 Racing
10-02-2013, 07:44 AM
I live in NE Arkansas and unfortunately I run 5 on 4.75 or I have a set I could borrow

rebel1mcelroy
10-29-2013, 12:05 PM
Run a 8 in. Asphalt pull off they are easier to mount and the tire wont roll over as bad

DANNY
10-30-2013, 06:03 AM
U can mount the 10 inch easily by shooting starting fluid inside and lighting it, they pop right on 10 or 12 inch rims.

Lmao first time I saw someone do that I was like WTF?!?!?!?

It does work in a pinch and gives you some pressure in the tire too :)

koltveitracing67
10-30-2013, 10:07 AM
Same way we used to mount semi tires................