PDA

View Full Version : KSE pump issues...


ZHR41
10-14-2013, 11:52 PM
I am wondering if anyone has had any issues with your steering being hard in corners/ below 5k rpm. My pump is the newest tandom X and 5 races old. Thanks for your time.
z40chief
10-17-2013, 04:00 PM
40 tooth gear on pump? That's what most run.
roger4228
10-17-2013, 08:46 PM
40 chief is right I believe kse recommends the 44 tooth but the 40 tooth takes out the tight steering at low rpm
ZHR41
10-18-2013, 12:11 PM
Well I have 24 on the drive side and 48 on the pump side. I also run on of the Gears unlimited falcon trans if that matters? Thanks for the help!
roger4228
10-22-2013, 10:26 PM
most run a 40 pump gear and the 22 drive gear. kse recommends the 44 I would say if you could get to the 44 tooth that would fix you right up