SCP
10-22-2013, 05:52 PM
.................................................. ... FOR SALE .................................................. ......
** Parts to build a 388" SBC motor: Brand NEW in the box Dart SHP splayed cap block. NEW Eagle 4340 steel 3 5/8" stroke crankshaft, USED Callies Comp Star 6.125"H-Beam rods & JE forged dome pistons (both look perfect condition). NEW Race H rod & main bearings & Total Seal rings. $2950 for everything.
** SBC Dart aluminum 215 PRO-1 heads. Fully ported & polished. Titanium intake valves, severe duty exhaust, Isky Tool Room roller springs & titanium retainers. Heads have fresh guides, competition valve job & surface. Heads have never been repaired or been welded-on. Low run time, nice set of heads ready to bolt on. $2150.
** SBC Dart fully CNC'd aluminum heads BARE, with fresh guides, competition valve job, surface. $1150.
** T&D shaft rockers for SBC 23 degree heads (Dart, Brodix, etc). Run one season. $800
** SBC Callies Comet 3 7/8" stroke 43 pound crank. 350 mains Like new crank that has been run 4-6 nights. $900
** SBC Callies Magnum crank, 3 7/8" stroke, 350 mains, 2" small journal rods, Got it on a trade, may have been repaired on one rod journal? New $1600, sell for $450
** SBC 392" rotating assembly. Callies Comp Star 4340 steel crank with 400 mains, JE dome pistons (+020" Bore), New Callies 6" Comp Star H-Beam rods. $1450.
** Super set of IRON heads. World cast iron, fully ported by Ron's Porting Service. Fresh valve job, guides & surface. Set up with new stainless valves. Flat tappet springs. ready to bolt on. Heads will out flow most aluminum heads. $1250 *** SOLD ***
** Comp Cams Magnum Roller Rockers 1.52 ratio for 7/16 stud and Jomar stud girdle w/ adjusters. $275
** SBC Pro Action/RHS iron 200 cc heads with port work. Complete w/valves, springs & retainers. Fresh rebuild. $650
** Fresh set of fully ported 882 GM Heads. Heads are BARE & have fresh rebuilt. They will take 2.02 & 1.6 valves. They have been machined for screw in studs & guide plates. $500.
** Ten NEW JE custom dome pistons & pins for SBC 383 stroker. Pistons are for +.030 bore & 6.125" rod. Cost $1100 Sell for $550.
** Oliver light-wt 6.125" Billet rods, like new. $800
** SBC Edelbrock Victor intake. $125-150
** SBC Dart intake fully ported. $450
** SBC Dart intake for tall deck. $200
** SBC NEW RHS race intake. $250
** SBC Bow-Tie fully ported intake. $450
** SBC Brodix/HVH intake w/port work & spacer. $350
** SBC Super Victor fresh back from HVH cnc "job". $550
** KSE HEX drive Tandem pump. $350
**SBC 6.25" Fluid balancer & billet timing pointer. $150.
** NEW Brinn transmission, still in the original box. $1600.
** Fresh 850 Gas Carb fresh from Jim Evans never run. $750
** New Shark/Gaerte 950 Gas Carb. $1000.
** Like new Gas 850 Black Gaerte Carb. $750.
CALL STEVE @ 636-677-1320 days or 314-374-5660 cell
(I DO NOT HAVE TEXTING ON MY CELL PHONE)
** Parts to build a 388" SBC motor: Brand NEW in the box Dart SHP splayed cap block. NEW Eagle 4340 steel 3 5/8" stroke crankshaft, USED Callies Comp Star 6.125"H-Beam rods & JE forged dome pistons (both look perfect condition). NEW Race H rod & main bearings & Total Seal rings. $2950 for everything.
** SBC Dart aluminum 215 PRO-1 heads. Fully ported & polished. Titanium intake valves, severe duty exhaust, Isky Tool Room roller springs & titanium retainers. Heads have fresh guides, competition valve job & surface. Heads have never been repaired or been welded-on. Low run time, nice set of heads ready to bolt on. $2150.
** SBC Dart fully CNC'd aluminum heads BARE, with fresh guides, competition valve job, surface. $1150.
** T&D shaft rockers for SBC 23 degree heads (Dart, Brodix, etc). Run one season. $800
** SBC Callies Comet 3 7/8" stroke 43 pound crank. 350 mains Like new crank that has been run 4-6 nights. $900
** SBC Callies Magnum crank, 3 7/8" stroke, 350 mains, 2" small journal rods, Got it on a trade, may have been repaired on one rod journal? New $1600, sell for $450
** SBC 392" rotating assembly. Callies Comp Star 4340 steel crank with 400 mains, JE dome pistons (+020" Bore), New Callies 6" Comp Star H-Beam rods. $1450.
** Super set of IRON heads. World cast iron, fully ported by Ron's Porting Service. Fresh valve job, guides & surface. Set up with new stainless valves. Flat tappet springs. ready to bolt on. Heads will out flow most aluminum heads. $1250 *** SOLD ***
** Comp Cams Magnum Roller Rockers 1.52 ratio for 7/16 stud and Jomar stud girdle w/ adjusters. $275
** SBC Pro Action/RHS iron 200 cc heads with port work. Complete w/valves, springs & retainers. Fresh rebuild. $650
** Fresh set of fully ported 882 GM Heads. Heads are BARE & have fresh rebuilt. They will take 2.02 & 1.6 valves. They have been machined for screw in studs & guide plates. $500.
** Ten NEW JE custom dome pistons & pins for SBC 383 stroker. Pistons are for +.030 bore & 6.125" rod. Cost $1100 Sell for $550.
** Oliver light-wt 6.125" Billet rods, like new. $800
** SBC Edelbrock Victor intake. $125-150
** SBC Dart intake fully ported. $450
** SBC Dart intake for tall deck. $200
** SBC NEW RHS race intake. $250
** SBC Bow-Tie fully ported intake. $450
** SBC Brodix/HVH intake w/port work & spacer. $350
** SBC Super Victor fresh back from HVH cnc "job". $550
** KSE HEX drive Tandem pump. $350
**SBC 6.25" Fluid balancer & billet timing pointer. $150.
** NEW Brinn transmission, still in the original box. $1600.
** Fresh 850 Gas Carb fresh from Jim Evans never run. $750
** New Shark/Gaerte 950 Gas Carb. $1000.
** Like new Gas 850 Black Gaerte Carb. $750.
CALL STEVE @ 636-677-1320 days or 314-374-5660 cell
(I DO NOT HAVE TEXTING ON MY CELL PHONE)