bob75
10-26-2013, 01:03 PM
have the following steel swedge tubes (brand new)
1-24inx3/4--15.00
5-18inx3/4--12ea
2-16inx3/4--10.00ea
2-15inx3/4--10.00ea
1-13inx3/4--8.00
4-11inx3/4--7.00ea
1-10inx3/4--6.00
1-9inx3/4--5.00
1-16inx5/8--10.00
3-12inx5/8--7.00ea
1-13inx5/8--7.00
1-11inx5/8--6.00
1-8inx5/8--5.00
1-7inx5/8--5.00
1-5inx5/8--4.00
1-13inx5/8 out pace--15.00
3 pro shocks --97--94--95.3 15.00ea
1-4in aero bead lock--60.00 5x5 pattern
3set of quick change gears with totes -511-542-549 30.00 aset
1- hand held allstar siper 10.00
1 motor lift plate 10.00
1-60247 afco bearing 15.00
1- brand new 1in longer pierce right side ump lower a-arm with ball joint 125.00
2- used pinto spindles ,rotor , and brake brackets 75.00 for the pair,(lower ball joint were not reimed out properly used a drill bit to reim out but will work.
815 541 9656 the more you buy the better deal
1-24inx3/4--15.00
5-18inx3/4--12ea
2-16inx3/4--10.00ea
2-15inx3/4--10.00ea
1-13inx3/4--8.00
4-11inx3/4--7.00ea
1-10inx3/4--6.00
1-9inx3/4--5.00
1-16inx5/8--10.00
3-12inx5/8--7.00ea
1-13inx5/8--7.00
1-11inx5/8--6.00
1-8inx5/8--5.00
1-7inx5/8--5.00
1-5inx5/8--4.00
1-13inx5/8 out pace--15.00
3 pro shocks --97--94--95.3 15.00ea
1-4in aero bead lock--60.00 5x5 pattern
3set of quick change gears with totes -511-542-549 30.00 aset
1- hand held allstar siper 10.00
1 motor lift plate 10.00
1-60247 afco bearing 15.00
1- brand new 1in longer pierce right side ump lower a-arm with ball joint 125.00
2- used pinto spindles ,rotor , and brake brackets 75.00 for the pair,(lower ball joint were not reimed out properly used a drill bit to reim out but will work.
815 541 9656 the more you buy the better deal