little36racr
12-07-2013, 04:04 PM
$7,000
Complete 415 carb to pan. 6 races since freshened. 10 since new.
Dart Little M Sportsman lightened, 4.125 bore, 350 mains, line-honed, square decked to 9.005, .842 lifter bores. ARP head studs.
Scat ULW 3.875 stroke Std/Std crank. Howards Prolite 6" I beam rods w/ARP2000 bolts.
Howards Roller cam and lifters, Harland Sharp 7/16" 1.5:1 roller rockers, Comp magnum pushrods.
JE Forged 14.1:1 domed pistons, Truseal file-fit rings, Clevite 77 bearings, ATI 7" super damper, Cloyes true roller billet timing set, ACI alum hi-flow waterpump, MSD ProBillet distributor, 8mm spiro-pro wires.
Brodix Track1 M2 CNC fully ported 64cc heads. 215cc intake runners, milled slightly. PAC valve springs, 208/160 valves, titanium retainers. HVH1000 intake cleaned up and port matched to heads, Barry Grant 750 cfm Alcohol carb. Champ 8qt pan, Schoenfeld 1 7/8" stepped headers with 3.5" collectors and Vortex cone mufflers.
Pulls right along with the best of 'em. Smooth and reliable. Never been on the Dyno but should be right around 650hp.
Also have 383 with Track 1 heads, eagle crank and H-beam rods complete Intake to pan for $3000. Is apart but everything there to assemble except gaskets.
Call or text 419-303-8570
DO NOT message me, its not my stuff. thanks.
Complete 415 carb to pan. 6 races since freshened. 10 since new.
Dart Little M Sportsman lightened, 4.125 bore, 350 mains, line-honed, square decked to 9.005, .842 lifter bores. ARP head studs.
Scat ULW 3.875 stroke Std/Std crank. Howards Prolite 6" I beam rods w/ARP2000 bolts.
Howards Roller cam and lifters, Harland Sharp 7/16" 1.5:1 roller rockers, Comp magnum pushrods.
JE Forged 14.1:1 domed pistons, Truseal file-fit rings, Clevite 77 bearings, ATI 7" super damper, Cloyes true roller billet timing set, ACI alum hi-flow waterpump, MSD ProBillet distributor, 8mm spiro-pro wires.
Brodix Track1 M2 CNC fully ported 64cc heads. 215cc intake runners, milled slightly. PAC valve springs, 208/160 valves, titanium retainers. HVH1000 intake cleaned up and port matched to heads, Barry Grant 750 cfm Alcohol carb. Champ 8qt pan, Schoenfeld 1 7/8" stepped headers with 3.5" collectors and Vortex cone mufflers.
Pulls right along with the best of 'em. Smooth and reliable. Never been on the Dyno but should be right around 650hp.
Also have 383 with Track 1 heads, eagle crank and H-beam rods complete Intake to pan for $3000. Is apart but everything there to assemble except gaskets.
Call or text 419-303-8570
DO NOT message me, its not my stuff. thanks.