PDA

View Full Version : Racing Sell Out #1



patchracing
01-31-2014, 06:37 PM
2 sets - Gun Drilled Axels 32.5" & 28.5" $100/set
1 set - Axels 32.5" & 28.5" $75
1 - Bert Magnesium Bellhousing w/ KSE pump Quartermaster starter with new belt $800
2 - 3 speed tranny Shafts turned down for long snout/yoke $200/per
1 - 3 speed tranny 1st gear removed $200
1 - 3 speed tranny saginaw, truck transmission $100
1 - 3 speed shaft turned down $35
2 - 605 steering box $75/per
2 - Real 3" beadlock Brand new in box, 5x5 chrome $150/per
1 - Real 3" beadlock brand new, 5x4 1/2 chrome $150
1 - Aero 4" beadlock brand new in box, 5x5 grey $100
1 - MSD 6al box brand new in box $200
1 - MSD 6al box used, MSD coil works $150
1 - Alcohol Carb 1050 BLP, alcohol, with 1" Flow Design Spacer $700
1 - Alcohol Carb 750 Demon, w/ 1" spacer $450
1 - Alcohol Carb basket case, dissassembled Barry Grant 750 $125
1 - DUI cap w/ module $70
3 - BSB pinion mounts $40/per
2 - Afco pinion mounts $25/per

IMCA motor, 420 4-Bolt block, STD. 4340 Eagle crank & H-beam rods with ARP 2000 bolts. JE Pistons, comp flat tappet cam, Dart 230 heads, new Ferrea Valves 208-1.60, Kevco pan, Comp Rockers, Melling oil pump & pickup, Total seal rings, ATI balancer, KSE pump, Victor Jr intake. Completely freshened w/ 2 races. $5,000

Open motor 408 Dart Block, STD. lightweight Crower Crank & Crower A-beam rods, comp roller cam, Protop line cnc ported heads, Jesel shaft rockers 2.125-1.60, Kevco oil pan, Melling oil pump & pick up, JE pistons, Total seal rings, ATI balancer, Victor Jr intake. Minimal races $$7,000

Homemade Trailor w/ 2 row tire rack and aluminum diamond plate box (46” deep x 48” tall x 84” wide). Open floor, 23’ from end to end, pull out ramps, 4’ dove tail, 84” between fenders, 5,200 torflex easy use axels, 2” equalizer hitch, floor is 18” off ground, all LED lights, comes with title. $4,000 pictures available

Travis Patch
785-364-8070
Holton, KS

patchracing
02-04-2014, 09:12 AM
Updated 2/4

Scott11JS
02-05-2014, 12:43 AM
is the kse pump and tandum pump or just power steering? if its a tandum how much just for the pump

Racer's Auction
02-14-2014, 02:00 PM
Discover what veteran racers have known for years. Sell your unused racing parts that have set on the shelf for more than one year for fair market value and buy some parts that you can use in the upcoming year at one place,one time without all the hassles of annoying phone calls,shipping,tire kickers,etc. http://www.facebook....erracersauction 3/1/2014 Hamilton Co 4H Fairgrounds, Noblesville, In Contact us ASAP to reserve your lot numbers or Swap Meet Booth Lot numbers are limited so act today 317-443-0668, jwauctioneer@frontier.com