View Full Version : need new tubes for a rocket
steelkiwi75
02-01-2014, 09:59 PM
I bought a 03 rocket.want to use the center section out of my old warrior. I know I need 33 and 36 in. Axles. But what are the tube lengths?
AmickRacing
02-02-2014, 04:42 AM
Add 5" to the axle length for the correct tube length
Matt49
02-02-2014, 08:46 AM
The tube is 6 inches SHORTER (not longer) than the axle. The tube can't be longer than the axle.
This is for a Winters but I'm pretty sure all the brands are pretty much the same on this.
Brian Gray
02-02-2014, 10:17 AM
the warrior rear should be the same you might want to check and make sure your measuring correct
steelkiwi75
02-02-2014, 10:43 AM
You are correct about the right side 36 but the left on Warrior is 32. And rocket needs to be 33.
toloud
02-02-2014, 11:24 AM
Get a 1" wheel spacer. A lot of newer rockets come with the shorter tube and a spacer.
Brian Gray
02-02-2014, 11:42 AM
my new rocket car the rear is shorter . they changed some things the last 2 years
AmickRacing
02-02-2014, 01:28 PM
whoops! Sorry about that guys, I shouldn't post after being awake that long lol
I ran across a picture on pitstop usa's site that showed the 5" difference. Thanks for the clarification Matt!
steelkiwi75
02-02-2014, 07:14 PM
If I use the 1 inch spacer, will I be able to get my bird cage in the proper place?
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.