All Aluminum Brodix 422 Super Late model engine

[cresswellracing]

All aluminum brodix 18 degree 422 super late model motor. All aluminum brodix heads and block. Heads are cut to 15.5 degrees. Block is decked as well. Motor has less than 200 laps on it and works great. Details are:

• Brodix Block & heads
• 15:1 Compression
• Jesel shaft rockers
• 4-7 Swap Comp Cam
• Comp Springs, Lifters & Titanium retainers
• CP Pistons (4.165)
• Lightweight 3.875 stroke crank
• Bowtie Intake (port matched)
• Moroso Crank Trigger
• MSD Pro Billet distributor
• CV Pulleys
• Valvetrain oilers
• Moroso Aluminum Dry Sump pan
• Smith 850 carb w/ HVH spacer
• Stainless Tri-Y Beyea headers w/ mufflers

Asking $11,500. Email jacecresswell@gmail.com for more info, pictures, etc. The last rebuild included new pistons, rings, cam, lifters, springs, adjustable timing set, all bearings, retainers, locks, valve seals, gaskets as well as milling heads & block. Have the receipt for the last rebuild of $6,118.

[cresswellracing]

Also willing to work out deal to have motor freshened up where I would pick up the tab on a refresh if someone is worried about buying a motor with a few laps on it. Nothing to hide here. Motor would be freshened up by reputable central PA builder. We can agree on an engine builder.

[extrememachining]

what kind of horsepower?

[cresswellracing]

Right on 800 hp but it can be dynoed again if you wanted to see it.

[cresswellracing]

Price drop to $10,000. Can't buy the parts for this.

[cresswellracing]

Pics are here:
https://imageshack.com/a/1psq/1

[cresswellracing]

More pics...

[cresswellracing]

Still for sale. Save the lowball offers though. $8500 is not going to get it. The rockers alone are close to $2000. Carrillo rods with Carr-SPS bolts, Valve train oilers, etc. Do the math. This all Aluminum 800 hp for $10,000 is a steal.