lake speed
03-22-2014, 09:49 AM
" all steel late model engine. gm block with splayed main caps, callies compstar crank, callies compstar 6" h beam rods, mahle Pistons, dart Iron eagle 215 heads, comp cam and complete valve train, msd billet distributor, super victor intake, stealth carb billet small cap msd distributor, msd 10mm wires, stewart water pump, fluiddamper balancer, competition components oil pan (wet sump) all the fasteners are arp. I have the build sheet and the balance sheet. asking $5500 obo or may trade for a ct525. will put cash with mine for a ct 525. will look at other engines for trade. please text 678-895-114eight
engine #2 is a
380 cubIc inch small block chevy.
the block is a 4 bolt 511 block needs to be bored .040 $300
the crank is a crower ultra light pendulum cut crank (new this was a$2600 dollar crank) internally balanced 3.500 stroke with 350 mains. $1500
crower 6" h beam rods $400
pro topline/rhs aluminum 23 degree heads, stainless ferea valves, comp dbl springs set up for solid roller up to 650" lift heads are comlete and ready to bolt on with t&d shaft rockers $1500
edelbrock super victor INTAKE $150
champ 8 QT PAN $150
ati dampner $150
will sell at a deal for the whole package.
ALL ARP FASTENERS. the block needs bored to .040 and it needs a set of pistons. everything else is there. intake to oil pan.
I also have a freshly machined 350 block with billet splayed caps, ready to assemble that the above rotating assembly would make a 362" for 500.00
may trade towards a nice all steel 350-363 or? 4 wheeler, golf cart what do you have?. please text 678-895-1148 located in atlanta ga
will put cash with this for a ct525 or the right trade
make offer for all of it. I will sell it cheap!!!
I will trade both for a ct525.
engine #2 is a
380 cubIc inch small block chevy.
the block is a 4 bolt 511 block needs to be bored .040 $300
the crank is a crower ultra light pendulum cut crank (new this was a$2600 dollar crank) internally balanced 3.500 stroke with 350 mains. $1500
crower 6" h beam rods $400
pro topline/rhs aluminum 23 degree heads, stainless ferea valves, comp dbl springs set up for solid roller up to 650" lift heads are comlete and ready to bolt on with t&d shaft rockers $1500
edelbrock super victor INTAKE $150
champ 8 QT PAN $150
ati dampner $150
will sell at a deal for the whole package.
ALL ARP FASTENERS. the block needs bored to .040 and it needs a set of pistons. everything else is there. intake to oil pan.
I also have a freshly machined 350 block with billet splayed caps, ready to assemble that the above rotating assembly would make a 362" for 500.00
may trade towards a nice all steel 350-363 or? 4 wheeler, golf cart what do you have?. please text 678-895-1148 located in atlanta ga
will put cash with this for a ct525 or the right trade
make offer for all of it. I will sell it cheap!!!
I will trade both for a ct525.